Kkl 409.1 Windows 10

1. VAG KKL USB + Windows 10
2. Kkl 409.1 Windows 10
3. Windows 7 Ultimate Sp1 64 Bit
4. Vagkkl Driver For Windows 10

VCDS-Lite works with all standard versions of Windows, from Windows 95 though Window 10. Both 32-bit and 64-bit Windows builds work fine, but if you're using a 3rd-Party USB interface, keep in mind that it is your interface supplier's responsibility to provide a driver for his hardware. VAG KKL 409.1 will be fully suitable with nearly all for VW/ for AUDI/ for SEAT/ for SKODA vehicles including those with KKL, but without CAN-BUS. VAG-COM 409.1 KKL interface (adapter) is usually utilized as an interface and a USB cable connection to link a for VW/ for AUDI automobile to a Computer with USB interface for on-board diagnostics (OBD). VAG KKL 409.1 is China obd 409.1 KKL USB cable. VAG-COM 409.1 KKL have the functions of a factory VAG-1551 or VAG-1552 scan tool and more. Need free download link for Vagcom 409.1 KKL USB Software? There is a simple script that will fool the VAG-COM 409.1. Home Product FAQs KKL interface - VAG-COM 409.1 on Windows 7 Installing VAG-COM 409.1 on Windows 7 The shareware version of Ross-Tech's VAG-COM package - version 409.1 - was written in 2004, and so was never designed to work with Windows 7. Kkl 409.1 Software Free; Download And Install The Vag Kkl 409.1 Software. Uncompress the file. Double-click on 'Install.exe' to install the drivers. Plug cable into any computer's USB port. 'Found New Hardware Wizard' will start and it will ask you 'Can Windows connect to Windows Update to search for the software?'

To get your interface up and running, you need to install software device drivers for the USB interface.

If you are installing the package on a PC that is connected to the internet, Windows 7 can automatically locate and install suitable drivers via Windows Update.
Just connect the interface to a USB port on the computer - Windows will then show a notification that it is locating and installing device drivers...

...and then another message when the installation is complete...

If the PC you are installing on is not connected to the internet, you will need to download the drivers via another PC and install them before connecting the interface. Windows 7 compatible drivers are available here:

Once the drivers are installed, you need to determine which COM port has been assigned to the interface by Windows. To do this you need to go into the Windows Device Manager.
Find the 'Computer' link on the desktop or the Start Menu, click the Right Mouse Button on it and choose Properties:

When the 'System' box appears, click on the Device Manager link on the left hand side:

Then when the Device Manager window appears, click on the arrow next to 'Ports (COM & LPT)' to see which COM port has been assigned to your interface - it will show as a 'USB Serial Port':

VAG-COM 409.1 can only connect to a COM port between COM1 and COM4.
- If the port number assigned to your interface is between 1 and 4, remember which port it's on, then skip to stage 3 - installing VAG-COM.
- If the port number assigned to your interface is higher than 4 (in the example above it is COM8), then you will need to change the port number.
To do this, double-click on the USB Serial Port to go into its properties, then click on the Port Settings tab:

Then click on the 'Advanced' button - this will show you a list of all the COM port numbers you could assign to the interface. Select a port number between 1 and 4 then press ok (if possible choose one that is not shown as 'in use'):

Stage 3: Download and install the VAG-COM Software

Next you need to download VAG-COM 409.1 from the Ross-Tech website:
www.ross-tech.com/vag-com/download/archives.html
(Use the link for version 409.1 - shown as 'For MODERN SERIAL Interfaces')
Save the file to your computer, then run it.
When installing VAG-COM on Windows 7, it is important that you do NOT install it within the 'Program Files' folder. Windows 7 protects this folder and prevents programs from writing files into it, which would prevent VAG-COM from working.
So when you see the screen showing the location for installation, change it to another folder, e.g. C:Ross-TechVAG-COM:

Once you have changed the installation location, click install, and wait for it to complete installation. The installer may not give a confirmation window - it may just disappear when it is finished.

Finally there are a few changes you need to make to get the software up and running.
VAG-COM requires administrator access to function, so find the shortcut to 'VAG-COM Release 409-1', click the Right Mouse Button on it, and choose Properties.
Then on the Properties page, select the 'Compatibility' tab, and tick the option marked 'Run this program as an administrator':

Click on 'Apply', then 'OK'.
You may need to repeat this for the shortcut on the Start Menu.

That should be all the preparation done. The final step is to open the VAG-COM software by that shortcut, go into the Options page, then select the COM port your interface is configured on:

Once you've selected the port, click Test, then OK. You should now be able to use the software.

There is a simple script that will fool the VAG-COM 409.1.

VAG KKL USB + Windows 10

What you need:

Kkl 409.1 Windows 10

• VAG-COM 409.1 release.exe
• Vag-Com 409.1 Cr.exe
• starter.bat – simple script that will fool the VAG-COM

Disconnect internet connection. Install VAG-COM. Install d1.bin, d2.bin and d3.bin. Do not run the program (if you did, you have to close it and reinstall bin files)

Before you run the program: In the main program directory create subdirectory named “full”: C:Program FilesVAG-COMfull and copy three files d1.bin, d2.bin, d3.bin from Cr installation direcotry. Run starter.bat.

Windows 7 Ultimate Sp1 64 Bit

Stage 3: Download and install the VAG-COM Software

Next you need to download VAG-COM 409.1 from the Ross-Tech website:
www.ross-tech.com/vag-com/download/archives.html
(Use the link for version 409.1 - shown as 'For MODERN SERIAL Interfaces')
Save the file to your computer, then run it.
When installing VAG-COM on Windows 7, it is important that you do NOT install it within the 'Program Files' folder. Windows 7 protects this folder and prevents programs from writing files into it, which would prevent VAG-COM from working.
So when you see the screen showing the location for installation, change it to another folder, e.g. C:Ross-TechVAG-COM:

Once you have changed the installation location, click install, and wait for it to complete installation. The installer may not give a confirmation window - it may just disappear when it is finished.

Finally there are a few changes you need to make to get the software up and running.
VAG-COM requires administrator access to function, so find the shortcut to 'VAG-COM Release 409-1', click the Right Mouse Button on it, and choose Properties.
Then on the Properties page, select the 'Compatibility' tab, and tick the option marked 'Run this program as an administrator':

Click on 'Apply', then 'OK'.
You may need to repeat this for the shortcut on the Start Menu.

That should be all the preparation done. The final step is to open the VAG-COM software by that shortcut, go into the Options page, then select the COM port your interface is configured on:

Once you've selected the port, click Test, then OK. You should now be able to use the software.

There is a simple script that will fool the VAG-COM 409.1.

VAG KKL USB + Windows 10

What you need:

Kkl 409.1 Windows 10

• VAG-COM 409.1 release.exe
• Vag-Com 409.1 Cr.exe
• starter.bat – simple script that will fool the VAG-COM

Disconnect internet connection. Install VAG-COM. Install d1.bin, d2.bin and d3.bin. Do not run the program (if you did, you have to close it and reinstall bin files)

Before you run the program: In the main program directory create subdirectory named “full”: C:Program FilesVAG-COMfull and copy three files d1.bin, d2.bin, d3.bin from Cr installation direcotry. Run starter.bat.

Windows 7 Ultimate Sp1 64 Bit

Vagkkl Driver For Windows 10

starter.bat source